Wednesday, October 2, 2019
Examine how Heaney presents his relationship with his father in :: English Literature
Examine how Heaney presents his relationship with his father in Digging and Follower. In the poem the Follower, the poet admires his father with all factions. The poet, Heaney, describes his father on verse 2, stanza 1 as being a very strong, well built man and classifies him as an "expert" (verse 5, stanza 2) when it comes to working in the field. In verse 10-12, stanza 3, Heaney describes his father's eye as "his eye narrowed and angled at the ground mapping the furrow exactly", this verse describes his father as if he was a sailor, carefully, watching the field as a map with a close eye making sure that everything is moving or growing the way they should be. In the poem digging, the reader begins to get a sense that time has moved on, and that the young boy has now become older as so did his father. The poet, Heaney, says on verse 7, stanza 3, "till his straining rump along the flowerbeds", this verse indicates that his father is old, and strains as he bends over to the flowerbeds, but even though the father is aging, he is still a strong man who can still hold a spade. Also, in the poem digging, it mentions about the grandfather of the poet. Heaney describes his grandfather through a series of recollections he had with him. In stanza 6 of the poem Digging, it is there the reader, reads about the poets past with his grandfather. From, the memories the poet recalls, the reader can see that the grandfather was like the father, careful and we also catch from verse 19 -21, stanza 6, which is a memory Heaney recalls of giving milk to his grandfather, he drinks it but than falls right away to work. From these verses the reader sees that he is extremely dedicated to his work and feels very strongly about it. In the end of the poem the Follower, the poet ends it very sudden, and leaves the reader puzzled. The end of the poem the poet says, "à ¢Ã¢â ¬Ã ¦It is my father who keeps stumbling behind me, and will not go away" (verse 23-24, stanza 6). These last two statements speak about the poet, as he is older. He is now taken on the tradition of continuing the legacy of farming as his father had done when he was young. When Heaney says he now stumbles behind me, the poet does not literally mean that his father is, but metaphorically instead is. In the past the son has admired his father's abilities to be able to farm with such elegancy,
Zagreb, Croatia :: essays research papers
SUBJECT: ZAGREB, CROATIA à à à à à Welcome to one of the most beautiful cities in Central Europe, Zagreb! Although located in a country plagued by war, it offers safety, a strong history, and many tourism destinations. It is considered to be ââ¬Å"the focal point of culture and science, and now of commerce and industry as wellâ⬠in Croatia. HISTORY: à à à à à Originally a ââ¬Å"suburb of the ancient Roman town of Andautoniaâ⬠, the Mongols invaded it in 1242. It became an important city of Croatia and Slovenia, which at the present time were provinces of Hungary, in the later part of the 13th century. In the 19th century, when Croatia was fighting for independence, Zagreb became an integral part of the nationalist movement. It became the capital of the Croatian Republic of Yugoslavia in 1945. When, in 1992, Croatia became and independent state, Zagreb remained as the capital. PLACES OF INTEREST: à à à à à Zagreb has three major regions. The Upper Town, Gornji grad, is over one thousand years old. It contains most of the cityââ¬â¢s museums, galleries and churches. It is also the home of the Presidential Palace, Banski Dvori, and Sabor, the Parliament. The Lower Town, Dolnji grad, mostly developed in the 1900ââ¬â¢s, is home to most restaurants, cafes, theatres, parks, shopping, and more importantly the nightlife. Of least interest to tourist would be Novi Zagreb, which hosts many skyscrapers and nothing of major interest . à à à à à Zagreb is called ââ¬Å"a city of museums as there are more of them per square foot than any other city in the worldâ⬠. Some of these are the ââ¬Å"Strossmayer Gallery, the Gallery of Modern Art, the Ethnographic Museum, and the Mimara museum which, with almost 4,000 priceless objects, is one of the finest art galleries in Europe.â⬠Other interesting artifacts located in Zagreb are the ââ¬Å"longest piece of writing in ancient Etruscan, and the remains of the Krapina prehistoric man.â⬠à à à à à The main square in the city is Trg Bana Jelacica. Once there all sights are within walking distance. It hosts a number of churches and cathedrals, which are very important to the Roman Catholic religion. Such as the Archbishopsââ¬â¢ Palace, which is attached to the beautiful St. Stephenââ¬â¢s Cathedral. Ivan Mestovic, a Croatian famous sculptor, has many works in St. Marks Church, another important sight. Located in Upper Town is the Stone Gate of the 13th century, on it is a painting of the Virgin Mary, which survived the ââ¬Å"great fire of 1731â⬠and also serves as a ââ¬Å"place of pilgrimageâ⬠.
Tuesday, October 1, 2019
Aging Out of Crime and the Unexpected Consequences
Aging Out of Crime and the Unexpected Consequences of Tougher Punishments April Chartrand Grand Canyon University JUS 250- Critical Issues April 20, 2012 Cuauhtemoc Espinoza Aging Out of Crime and the Unexpected Consequences of Tougher Punishments Did you ever wonder if our youth will ever outgrow the need to commit the crimes that they do? There have been numerous studies that most of our youth do outgrow the need to commit crimes. Usually by the age of 20 years old most juveniles age out of crime (Robert J.Sampson, 2005). For those who do not age out of crime by the second offense there are severe consequences that our society with higher moral standards, more severe punishments, and the placement of the three strikes laws place on these individuals. The three strikes law was installed to stop violent offenders from the continuation of their violent behaviors. In most cases the three strikes law works in keeping repeat offenders off the streets and keeps the victims of these crimes safe from further persecution.Although the three strikes law works it also increases the homicide rates. In many cases the repeat offenders who realize that they will receive the same punishment no matter what the crime decide to increase the crime to suite the punishment that they are inevitable to receive. More than half of the third strike offenders that are in prison today involve neither violent nor serious felonies. Even shoplifting can be escalated to a third strike felony bringing a sentence of life in prison for those with prior convictions of petty theft (Diaz, 2011).Many felons that realize that they will receive the same punishment for murder as petty theft end up killing their victims and police officers to avoid detection and apprehension (Marano, 2002). In California the three strikes laws have been approved to involve youth offenders as well as adults (Egelko, 2010). If two crimes are committed when the offender is a youth those two crimes follow that same youth thr oughout his life and if he commits a third offense when he becomes an adult he will suffer the consequences of 25 years to life in rison. As our adolescence develop, become more mature, engage in families of their own, and age out of crime there are some unexpected consequences that they may endure as our society holds higher moral standards, more severe punishments, and three strike laws for repeat offenders. Although there have been studies to prove that many of our juveniles age out of crime there are still severe consequences for those who do not rehabilitate after the first or second offense or do not age out of crime early enough in their lives.Many of these juveniles and young adults face the consequences of the three strikes laws. The consequence of the three strike law includes serving a severe punishment of 25 years to life in prison no matter what the crime may be. References Diaz, J. (2011, May 8). Crime and Punishment Politics of the Three Strikes Law. Retrieved April 2 0, 2012, from SFGate. com: http://www. sfgate. com/cgi- bin/article. cgi? f=/c/a/2011/05/08/INN21JB7OD. DTL Egelko, B. (2010, April 20). High Court: Calif. can apply ââ¬Ë3 strikes' law to juveniles. Retrieved April 17, 2012, from CorrectionsOne. om: http://www. correctionsone. com/juvenile- offenders/articles/2050079-High-Court-Calif-can-apply-3-strikes-law-to-juveniles/ Marano, L. (2002, September 16). Study: 3-Strikes Laws Increase Homicides. Retrieved April 19, 2012, from Upi. com: http://www. upi. com/Odd_News/2002/09/16/Study-3-strikes-laws-increase- homicides/UPI-23411032191348 Robert J. Sampson, J. H. (2005, October 25). A life course View of the Developement of Crime. Retrieved April 16, 2012, from The Annals of the American Academy of Political and Social Science: http://www. ann. sagepub. com/content/602/1/12
Monday, September 30, 2019
Gay Marriage: Social Calamity or Long Overdue? Essay
Abstract There is growing attention to the issue of marriage equality for gay people in this country. As of the writing of this paper, 16 of the 50 states in the United States of America have legalized gay marriage, either by legislation or by popular vote (Wisniewski, 2013). The discourse regarding the issue becomes quite contentious largely because of non-secular ideology that has demonized the concept of homosexuality for many years. As a sociological issue, the conflict has become a divisive force for many, from political powers as far down to the family level. The constitution guarantees equal rights for all in this country; freedom of religion, speech, etc. yet appears to stall when equal rights for the gay community are involved. There has been significantly more popular support for the cause recently, but the stigma and prejudice continue to linger. Is this a moral debate or has an outdated ideology become so embraced by many that the battle has only just begun? Are Rights Really Equal? When asked if one believes in equal rights for all citizens, the typical, rote response is a resounding ââ¬Å"Yesâ⬠. If the question becomes more specific as to include the right for homosexuals to marry, a hesitation follows. The concept of gay marriage is far deeper a societal problem for most because its roots lie in prejudicial perspectives that have permeated us for years. Before the fight for the right to marry, the gay community has long endured simply the right to exist openly without feeling pariah-like. The United States is not a theocracy, of this we are certain. However, there are many more religiously affiliated citizens than not. The First Amendment gives us freedom of religion, which should also include freedom from religion. The truth of the matter meets somewhere in between the two, especially when US currency bears ââ¬Å"In God We Trustâ⬠boldly on its face. There are political leaders who continue to evoke the name of God in their speeches, even thoughà the fact is that our founding fathers were mostly non-theists and the motto on our money did not initiate until 1958 or so. But people continue to view homosexuality as a ââ¬Å"sinâ⬠, therefore gay marriage is not an option. This issue has created a divide in this country, much like most other civil rights have. When slavery was abolished, it took years to establish anti-segregation laws. Civil change takes time, historically, and gay marriage is no different. Protests continue either in support of or against gay marriage, at times becoming violent. Families become divided when a member openly announces his or her orientation and disapproval prevails, sometimes resulting in families disowning or ostracizing that offender from the family. Government has been forced to become involved, due to an outcry for the various rights that are bestowed upon a married member of this society. Rights to inheritance and to personal medical information and decision making are two examples of spousal rights. Monogamous homosexual couples are denied these rights, since without marriage, the rights fall to their closest relative. Functional Sociology and Gay Marriage Society has long viewed traditional marriage a fundamental and necessary building block. Marriage is the institution by which our population is regenerated and offspring are socialized then integrated as functioning members. Functional theorists might argue that if the paradigm is changed to include same sex couples, social decay may follow, as the family unit is unable to function if not in the traditional way. Single parent households have been faulted with producing children that score lower in school than those from the traditional, two parent family, as well as have higher rates of unacceptable social behavior, such as drug abuse or teenage pregnancy. Functionalists believe children benefit from each gender parent in a different way, therefore require both to be whole. (Tischler, 2011) Conflict Theory and Gay Marriage Conflict theory maintains that society functions when a more powerful or accepted sector exerts its will and exceeds at the expense of less powerful or accepted portions. (Tischler, 2011). Since homosexuality has been regarded taboo by the majority for so long, heterosexuals have maintained their position of acceptance and normalcy in the US. Vocational positions,à especially powerful ones such as political leaders, have historically been heterosexual. We have a ââ¬Å"Presidentâ⬠and a ââ¬Å"First Ladyâ⬠; expected heterosexuality. For the stigma to be removed, traditionally expected and understood ways of life would drastically change. Would traditional, heterosexual marriage decay in the process? The Future of Marriage Regardless of sociological theory, religious belief, and cultural expectation, the movement towards acceptance of gay marriage is gaining momentum and losing the attached stigma. Gay marriage is legal in 16 states (Wisniewski, 2013), and gay couples right to adoption has increased. Heterosexual divorce rates remain hovering at a 50% mark, and have been for many years prior to homosexual marriage. Society is resilient, proving itself over years of change. The ideal aspiration would be for both homosexual and heterosexual married couples to simply co-exist; neither having any real influence over the othersââ¬â¢ success or demise. References Tischler, H.L. (2011) ââ¬Å"Introduction to Sociologyâ⬠. Retrieved from https://online.vitalsource.com/#/books/9781285396835/pages/55834839 Wisniewski, M (2013) Update 1-Illinois Governor Signs Same-Sex Marriage Into Law. Retrieved from http://www.reuters.com/article/2013/11/20/usa-gaymarriage-illinois-idUSL2N0J524N20131120.
Sunday, September 29, 2019
Residual Stress
INFLUENCE OF RESIDUAL STRESSES ON FATIGUE FAILURE OF BUTT WELDED STAINLESS STEEL PIPE Areef A Department of Mechanical Engineering Chendhuran college of Engineering and technology Pudhukkottai, Tamilnadu [emailà protected] com Abstractââ¬â This project is aimed to understand the influence of residual stresses on the fatigue failure of butt welded stainless steel pipe joints. In order to carry out this study it requires an experimental fatigue failure data and a computer aided analysis of these results. A finite element scheme will be developed to simulate the residual stress in weld using the experimental data.A Thermo-elasto-plastic analysis will be used to replicate the butt welded pipe joint and the residual stress will be determined. Residual stress that arises in welded joints by heating and cooling cycles during the welding process is another major factor in fatigue failure of welded structures. Welding residual stresses might lead to a drastic reduction in the fatigue st rength of welded elements. In multi cycle fatigue (N > 106 cycles), the effect of residual stresses can be comparable to the effect of stress concentration.The effect of residual stresses on the fatigue life of welded elements are significant as regards relieving harmful tensile residual stresses and introducing beneficial compressive residual stresses in the weld toe zones. The fatigue failure can be classified in to two categories based on the number of cycles taken to fail. A. High cycle fatigue High-cycle fatigue is when the number of cycles to failure is large, typically when the number of cycles to failure, Nf is greater than 103. B. Low cycle fatigue Low- cycle fatigue is when the number of cycles to failure is small, typically when the number of cycles to failure, Nf is less than 103.III. RESIDUAL STRESS ON WELD Residual stresses can be defined as the stresses that remain within a material or body after manufacture and material processing in the absence of external forces or thermal gradients. They can also be produced by service loading, leading to inhomogeneous plastic deformation in the part or specimen. Residual stresses can be defined as either macro or micro stresses and both may be present in a component at any one time. They can be classified as: Macro residual stress that develop in the body of a component on a scale larger than the grain size of the material.Micro residual stresses that vary on the scale of an individual grain. I. INTRODUCTION Welding has a number of detrimental effects on the structural integrity and in-service performance of the weldments. These detrimental effects are due to imperfections induced by the welding in the weldments, of which the structural shape change behavior, residual stresses and the weld solidification cracks are reported to have very severe degrading effects on the mechanical strengths and possibly can lead to catastrophic failure.Fatigue is a type of fracture that occurs in welds that are subjected to c hanging or varying stresses over time. Fatigue is mainly caused by the environment in which the welded joints are utilized. Fatigue fracture is a ductile fracture, and therefore occurs by non-uniform plastic deformation. Micro cracks and voids form after a certain number of cycles and grow proportional to the number of cycles eventually grow large enough to overcome recovery mechanisms and move quickly to fracture. The rate of this crack nucleation is proportional to the frequency of the applied stress.II. FACTORS IN FATIGUE FAILURES Fatigue failures of welded joint are initiated by many factors, such as stress concentration, environment, loading and residual stresses. Stress concentration is mainly caused by the geometrical discontinuity and thus initiates fatigue crack at the locations of discontinuity. Stress concentration may also result from weld defects and metallurgical discontinuity. Fatigue strength of weld component may also be significantly affected by the environment, su ch as oxygen, sulfur, and temperature.In addition to the axial stresses in the piping systems reduction in fatigue life also takes place by multiaxiality of loading or stresses. Micro residual stresses that exist within a grain, essentially as a result of the presence of dislocations and other crystalline defects. IV. CAUSES OF RESIDUAL STRESS Residual stresses are generated during most manufacturing processes involving material deformation, heat treatment, machining or processing operations such as welding, machining, grinding, and rod or wire drawing etc.It is possible to classify the origin of residual stresses in the following way: 1. 2. 3. Differential plastic flow Differential cooling rates Phase transformations with volume changes are one of the main factors leading to the origination and propagation of fatigue cracks in welded elements. The residual stresses in the welded joints are formed as the result of differential contractions which occur as the weld metal solidifies an d cools to ambient temperature. In fact, welding introduces high heat input to the material being welded.As a result of this, non-uniform heat distributions, plastic deformations and phase transformations occur on the material. These changes generate different residual stresses patterns for weld region and in the heat affected zone (HAZ). Residual stresses induced by shrinkage of the molten region are usually tensile. Transformation induced residual stresses will cause more critical phase transformations. When the effect of phase transformations is dominant compressive residual stresses are formed in the transformed areas.Tensile residual stresses are detrimental to the initiation and growth of fatigue cracks. Weld fatigue failure is often particularly sensitive to residual stress due to stress concentrations induced by the weld joint geometry and weld imperfections. Welding residual stress acts as a booster to the fatigue problem. Hence, crack growth rate becomes considerably highe r in the weld vicinity compared to that far from weld. The fatigue failure mechanism in the presence of weld residual stress is not well understood and it is the intent of this project to explore this mechanism.However, to quantify the effects of welding residual stresses in the design stage, one has to numerically simulate its distribution and redistribution and possible relaxation in a structure due to cyclic loading. This requires the need for a robust, reliable and numerically efficient method for modeling residual stresses. Previous studies reveals that depending upon mean stress, stress amplitude, and stress ratio of uni axial cycle stressing and two kinds of failures ratcheting failure and fatigue failure. Figure 3.Explains the variation of ratcheting strain with stress amplitude. In which we shall see that stress increases apparently with the increase in nominal stress amplitude. It implies that the effect of nominal stress amplitude on ratcheting is more significant than me an nominal stress. The variation of mean stress with ratcheting strain is explained in figure 4. In which we shall see that ratcheting strain also has an increasing trend with the mean nominal stress up to a particular limit. V. EXPERIMENTAL TECHNIQUESWelding residual stresses are generated in a structure as a consequence of local plastic deformations introduced by local temperature history consisting of a rapid heating and subsequent cooling phase. During the welding process, the weld area is heated up sharply compare to the surrounding area and fused locally. The material expands as a result of being heated. The heat expansion is restrained by the surrounding cooler area, which gives rise to thermal stresses. The thermal stresses partly exceed the yield limit, which is lowered at elevated temperatures.Consequently, the weld area is plastically hot-compressed. After cooling down too short, too narrow or too small comparing to the surrounding area, it develops tensile residual stres s, while the surrounding areas are subjected to compressive residual stresses to maintain the self-equilibrium The distribution of residual stresses in a welded pipe is more complex, Fig. 1 shows the possible expansion and shrinkage in a butt welded pipe. In this case, shrinkage of the weld in the circumferential direction induces circumferential force, F, shearing force, Q, and bending moments, M, to the pipe.Figure. 2 shows a characteristic residual stress profile on a low carbon steel welded component. Also the distribution of residual stresses in a pipe is affected by many factors such as diameter, wall thickness of the pipe, weld geometry, and welding procedure. From the graphical plot we shall see that the maximum value of the harmful residual stress is about 360 N/mm2 (tensile stress) near the welding line and it decreases to be about 165 N/mm2 at the distance of 80 mm from the welding axis.The minimum residual stress is about 90 N/mm2 near the welding line and it becomes abo ut 60 N/mm2 in compression at the instance of about 60 mm, then it reduces to about 10 N/mm2 in tension at 80 mm distance from the axis. Such high tensile residual stresses are the result of thermoplastic deformations during the welding process and A. Sample Used The material used for the study is stainless steel material of grade SS304. The material is chosen because of its following properties. It has an excellent corrosion resistance in a wide range of atmospheric environments and many corrosive media.Considering its heat resistant property it is not suitable to use in a range of 425-860à °C if subsequent aqueous corrosion resistance is important. This material has excellent weld ability by all standard fusion methods, both with and without filler metals. Welding of 304 can be done with Grade 308 and 308L rods or electrodes (and with their high silicon equivalents). Heavy welded sections in Grade 304 may require post-weld annealing for maximum corrosion resistance. Tensile Stren gth (MPa) min 515 Yield Strength 0. 2% Proof (MPa) min 205 Elongation (% in 50mm) min 40 Rockwell B (HRB) max 92 Brinell (HB) max 201D. Finite element analysis Most of the residual stress studies were conducted based on either axi symmetric or 2D plane assumptions due to the limitations of the finite element codes and computer resources available during the time of the study. Moreover, the thermo-mechanical problem was assumed to be uncoupled where the thermal and mechanical responses were treated separately. Furthermore fatigue failure usually initiate at the stress concentration area and fatigue loading is usually not axi symmetric, and hence a two dimensional model can not simulate the fatigue failure response of weld joints accurately.In order to simulate the fatigue response of welded joints in the presence of residual stresses, it is essential to conduct a three-dimensional analysis. Figure 5. Illustrates the solid and FE model of the specimen RESULT AND DISCUSSION 3D finite e lement fatigue response analyses for a socketwelded joint were performed by using ANSYS. This is needed in order to include the calculated residual stress and strain fields as the initial stresses and strains in the fatigue analysis. A fixed boundary condition at the socket end is imposed.Same finite element mesh and the material model used in the residual stress analysis, are restricted to be used in the fatigue analysis. The following are some of the discussions we found out after the comparative experiments on Fatigue machine and computer aided simulation. High tensile residual stresses, at or above the yield stress level, exist near the weld toe area, especially at the weld start/stop location. The magnitude of the residual stresses reduces quickly as the distance from the weld toe increases. The residual stress distribution does not change much when the slip-on gap in the socket weld joint is reduced to zero.Hence, the increase in fatigue life of socket welds with no slip-on ga p is unrelated to residual stress. The improvement in fatigue life may come from the change in failure mode, which in turn, may be influenced by the change of the external load stress or strain distribution. REFERENCES [1] Guozheng Kang, Yugie Liu, and Zhao Li ââ¬Å"Experimental study on ratchetting-fatigue interaction of SS304 stainless steel in uni-axial cyclic stressingâ⬠ââ¬â International journal of Materials Science and engineering, Volume 435, 2006, Pages 396-404. N. S. Rossini, M. Dassisti , K.Y. Benyounis, A. G. Olabi ââ¬Å"Methods of measuring residual stresses in componentsâ⬠International journal of Materials and Design, Volume 35, 2012, Pages 572ââ¬â588. Y. Kudryavtsev and J. Kleiman ââ¬Å"Fatigue of Welded Elements: Residual Stresses and Improvement Treatmentsâ⬠Integrity Testing Laboratory Inc. 80 Esna Park Drive, Units 7-9, Markham, Canada presented paper in the year 2005. Z. Barsoum ââ¬Å"Residual stress analysis and fatigue of multi-pass welded tubular structuresâ⬠International journal of Engineering Failure Analysis, Volume 15, 2008, Pages 863ââ¬â874. M.Farajian-Sohi, Th Nitschke-Pagel, K ââ¬Å"Residual stress relaxation in welded joint under static and cyclic loadingâ⬠Issued from International Centre for Diffraction Data 2009 ISSN 1097-0002. Grade 304 Table. 1 Mechanical property of SS grade 304 Elastic modulus (Gpa) 193 Thermal conductivity (W/m. K) 16. 2 Specific heat (J/kg. K) 500 Electrical resistivity (ohm) 720 Grade Density (kg/m3) 304 8000 Table. 2 Physical property of SS grade 304 B. Stainless steel welding Methods There are three methods of stainless steel welding which are preferred over the rest.Metal Inert Gas (MIG) welding, Tungsten Inert Gas (TIG) welding, and Shielded Metal Arc Welding (SMAW). Stainless steel welding requires a bit more finesse than welding mild steel or aluminum, because heat is an enemy in this process. Also the fumes made from any of these processes are very harmf ul, and great care must be taken to avoid breathing them. TIG welding utilizes a tungsten welding electrode, a filler metal rod and an inert gas to shield the weld. This welding method requires little or no post-weld finishing. The tungsten tip in the welding torch is touched to the material to be welded.This creates an arc that the welder dips the filler metal rod into and allows it to melt into the welding puddle. The shielding gas prevents contamination from entering the weld and allows the weld to flow out smoothly. Heat is controlled through a foot switch. So the suggested welding method is TIG welding. C. Fatigue test Butt welded piping joints were tested in a cantilever setup. In these test the welded joint to be tested is located near the heavy and stiff support column. The fatigue loading cycle is applied to the other end of the pipe using the actuator of a servo- hydraulic testing machine through a pin end fixture setup.The pin end fixture consists of a self-aligning ball bearing and a pin, which is snugly fitted to the ball bearing and tightly attached to the end fixture. One of the pin end fixtures is tightly screwed to the actuator rod and the other welded to the specimen. [2] [3] [4] [5] [6] D. Akbari, I. Sattari-Far Faculty of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran ââ¬Å"Effect of the welding heat input on residual stresses in butt-welds of dissimilar pipe jointsâ⬠International Journal of Pressure Vessels and Piping, Volume 86, 2009, Pages 769ââ¬â776. [7] B. Brickstad, B. L.Josefson ââ¬Å"A parametric study of residual stresses in multi-pass butt-welded stainless steel pipesâ⬠International Journal of Pressure Vessels and Piping, Volume 75, 1998, Pages 11-25. Figure 3. Relation between ratcheting strain with stress amplitude Figure 4. Relation between ratcheting strain with Mean stress Figure 1. Distribution of longitudinal fillet weld Residual stress on a butt welded pipe Figure 5. Solid model (a) and FE model (b) of welded pipe Figure 2. Distribution of longitudinal fillet weld on a carbon steel welded component Axial residual tress distribution in a buttwelded joint
Saturday, September 28, 2019
Assignment Essay Essay Example for Free
Assignment Essay Essay Sustainable tourism is being able to the deliver positive environmental, social, and economical results with thought to the needs of the visitors, host community and surroundings. Sustainability as defined in the Brundtland commission report it states as ââ¬Å"meeting the needs of the present without compromising the needs of the future generations to meet their needsâ⬠. For example, the small business are starting to practices sustainability principles by changing to renewable energy sources, reducing use of paper and recycling more. As a result, the concept of sustainability addresses the aspects of ââ¬Å"triple bottom lineâ⬠meaning the balance of societies, economy and the environment are described by (Bonevac, 2010). According to the World Tourism Organization, ââ¬Å"sustainable tourism means meeting the needs of the present tourist and host regions while protecting and enhancing the opportunity for the futureâ⬠. Instead of just being a product, sustainable tourism is a philosophy that underpins all tourism actions (Owens, Is there a Meaningful Definition of Sustainability? , 2003). To all tourism development and management, it is a fundamental concept instead of being an add-on factor. The foremost aim of sustainable tourism is to maintain the economic and social return of tourism development while reducing or justifying the unattractive impacts on the natural, historic, cultural or social environment (Governemnt, 2009). The stated objectives attained by matching the needs of tourists with those of the destination. Sustainable tourism is an industry, which challenges to make a little impact on the environment and the local culture, though helping to produce income, employment and the preservation of local ecology. Hence, responsible tourism is both cost-effectively and culturally responsive, meaning have minimum impact on the environment and culture of the host community (Group, 2007). Scotland Tourism Organization has defined sustainable tourism as ââ¬Å"tourism committed to generating a low impact on the surrounding environment and community by acting responsibly while generating income and employment for the local economy and aiding social cohesionâ⬠(Organisation v. s. , 2013). Scotland Sustainable tourism aspires to guarantee that economic development in terms of encouraging experience for each one involved local community, Tourism Companies and visitors. In practice, sustainable tourism means greener transport, given that transport is innermost to tourism; however it also put pressure on our natural resources and contributes to our worldwide environment impacts. Procedures like cheering visitors to utilize communal transport, and advance in cleaner forms of transport will assist in this area (Organisation v. . , 2013). Regular and environmental strains a more even stretch of visitors lessens pressures on the natural and built environment and on communities, and capitalizes on the financial payback. Scotland Tourism Organization modifies its advertising drive to persuade a stretch of visitors throughout the year and around state (Organisation v. s. , 2013). For example, ââ¬Å"surprise yourselfâ⬠. There is necessary to work with the public, private and independent sectors to determine the environmental and social impacts of tourism. These guarantees that tourism expansion carries a encouraging experience for home people, tourism companies and the tourist themselves (Organisation v. s. , 2013). Green accommodation is one in that all room offers lessens their misuse, energy and water use. The green Tourism Business Scheme persuades businesses to trim down their environmental impacts. The scheme is one of the largest of its land in Europe with over 800 Scottish members (Organisation v. s. , 2013). However, any tourism industry can take advantage from flattering more sustainable through safeguarding the very features on which tourism depends; taking a sustainable move to tourism expansion is the only way to guarantee long-term tourism expansion in the South Pacific (Organisation v. s. , 2013). The success of tourism in any country depends on taking care of the environmental or social impacts of tourism development. The visitors benefit from sustainable move to tourism throughout from enhanced relates with local communities, a tall value tourism experiences and a natural and fabricated environment. Thus, by fetching a sustainable tourism destination will provide the South Pacific Tourism Businesses a cutthroat frame by producing community assistance for tourism; attaining value savings and designing innovative marketing prospect. As the tourism industry develop in as many regions and countries, it generates noteworthy impact on the consumption pattern, natural resources, pollution and social systems (Organisation v. s. , 2013). For the industry to survive as a whole it is vital to understand and interpret the need sustainable and responsible planning and management. To begin with, education and collaborative partnership are approaches that can assist destinations attain more sustainable tourism. The whole idea of sustainability based on the association through environmental, ecologically and socially responsible tourism. Partnerships with local communities through rural community gathering before and during development are needed in order to let alone the frequent divergence between conservation initiatives and traditional resources users (Billington, Carter, & Kayamba, 2008). The departments from the government can collaborate with the resource owners to develops and negotiate over the investment on proposal (English National Park Authorities Association, 2009). For example, the Chumbe Island Coral Park is a good example of collaborate partnership, which was developed to sustain the natural beauty and attractions of the island (English National Park Authorities Association, 2009). Chumbe Island is located in the Indian Ocean channel of the coast of the semi autonomous region of Zanzibar (English National Park Authorities Association, 2009). The person responsible for the project on the natural park at Chumbe Island was (David, 2011). During her work life, (David, 2011) experience the need for the conservation and sustaining of the natural flora and fauna. (David, 2011) developed an innovative approach to protect marine conservation combined with tourism development through the sustainable and multilevel partnership approach to promote successful marine park management, awareness of marine conservation and sustainable tourism management. David, 2011) Develop a small marine park that would help consume a unspoiled coral reef, offer environmental education for both the locals and the foreign visitors and generate management fund through authentic ecotourism. Thus, the need for the park at Chumbe Island arose due to improper aid and the government in the country noted conservation programs. Hence, the collaborative partnership arose to sustain the nature conservation of Tanzania for the future (English National Park Authori ties Association, 2009). Secondly, the partnership approach deals with the local communities because they are the essential people who are the resource owners (Governemnt, 2009). Engaging the local community in the environmental education on sustainability through workshops and seminars will increase their concerns for the global issues such as climate change (Clark, 2013). In addition, collaboration with NGO has to hold workshops with the anglerââ¬â¢s, to engage them in sustainable fishing practices and conservation of the resources (David, 2011). Thus, the young and the old generation in the area is to be informed about sustainable fishing practices, laws and regulation regarding fishing practices and marine conservation area and the benefits of marine protected areas (Ki-Hoon & Ball, 2003). All this environmental awareness, education and training initiative with the community are to provide skill development on sustainable tourism (Group, 2007). The scale of growth of the tourism industry In the South Pacific is rapidly and that the environmental and social, economic impacts of it cannot be overlooked (Azam & Sarker, 2011). This has caused the Pacific Region to find ways in which the industries could be made more sustainable. The industry is more sustainable through minimizing resource use and waste production (Othman, 2004). For the sustainability of tourism, water is the major issue for concern. For example, a tourist in a hotels uses on standard one third of more water per day than a local inhabitant uses and put severe restriction on local supply (Othman, 2004). Activities such as golf course, artificial snow skiââ¬â¢ resorts are in demand of water. For small and medium sized business, sustainability thought of an expensive and difficult idea (Billington, Carter, & Kayamba, 2008). Most of the dominating tourism industries in the South Pacific have not actively engaged in government activities that encourages that adoption of sustainability practices (David, 2011). There are a number of barriers identified by the researchers that hinds implementing sustainability practices in South Pacific tourism businesses including the financial crisis for implementation, the labor insecurity of being certified, lack of government and industry support the technical nature of information forums. Hence are a number of actions businesses could undertake to improve environmental performance (Azam & Sarker, 2011). Activitiesââ¬â¢ relating to efficient resources use and waste management includes minimizing energy consumption, for example using open ventilation instead of air-conditioning and heaters encouraging the use of renewable sources and improved technology also Getting involved in accreditation programs (Owens, Is there a Meaningful Definition of Sustainability? 2003). There is a need to promote and facilitate the reduction, reuse and recycling of materials and water quality including the efficient treatment of sewerage, avoiding discharge into marine and rivers (Organisation, 2005). For example, in Australia the Australian formula 1 ING grand Prix Corporation, which works with environmental packaging and waste recycling partner to minimize the impact of the race on the environment? Billington, Carter, & Kayamba, 2008) Thus, by minimizing waste use, energy use and waste production, businesses can reduce their impact on the environment and achieve cost savings (Ki-Hoon & Ball, 2003). Furthermore, the conserving and giving value to natural and cultural heritage is of critical importanceââ¬â¢s, in order to enhance the quality of life of local communities through tourism, and connect the people in is scheduling and management (Organisation, 2005). The growing awarenessââ¬â¢s and generating direct and indirect support for conservation is the key role played by the tourism industry (Group, 2007). The generation of economic propensity for the tourism industry is to provide with quality natural and cultural heritage (Azam & Sarker, 2011). This would ensure the long-term competitiveness, viability and the prosperity of tourism enterprises and destinations and the quality of life of local communities and to the visitor experience by providing a safe, satisfying and fulfilling experience to the visitors available to all without discrimination by gender, race, religion, disability or in other ways (Organisation, 2005). Areas that are of importance to tourism natural and cultural includes the natural landscapes quality and variety, man-made cultural landscapes, heritage and historic sites, the flora and fauna diversity, local uniqueness such as art, crafts, cuisine, language events and festivals (Organisation, 2005). Thus, to address these issues listed above relevant action like being more prepared to use the tourism argument as to fund the prevention of nature and culture and to prevent damaging change (Clark, 2013). Also strengthening the relationship between protected area and local tourism interest, within the context of a sustainable tourism strategy and action plan would lead the South Pacific to be more sustainable (Organisation v. s. , 2013). Sustainable development is holistic in nature; therefore, it requires management of policies and coordination of action between sectors (Othman, 2004). To control the impact of tourism initiated by environmental or developmental strategies and policies legislation and regulations are necessary (Governemnt, 2009). Appropriate strategies or sets of policies for specific aspects of tourism were developed. For example, in Bulgaria the separate strategy for ecotourism, which reflects the sustainability principles? (Bonevac, 2010) This initiative can also be taken by the local Ministry of Environment of Tourism to integrate the strategy in terms of regulations (David, 2011). In coordinating and ensuring success of this specific sub-sector, such regulations and legislations can be very helpful. This can be very helpful in demonstrating processes and formulating policies that could be modified more widely in tourism (Ki-Hoon & Ball, 2003). Strategy and policies must be developed and implemented at both local and national level in order to achieve effective result. Most countries in the South Pacific are in the process of decentralizing their political and administrative structures so local decision-making is the vital aspect toward sustainability development (English National Park Authorities Association, 2009). An integrated approach to the development and management of tourism is within local destinations, is recognized as the most successful direction to sustainable tourism (Governemnt, 2009). Thus, it is vital for the national and local strategies to be corresponding but these two variable in tourism strategies vary in terms of national tourism strategies relates to the national tourism vision of the overall position and direction (Organisation v. s. , 2013). While local tourism strategies relates to the holistic of the local destinations in areas such as local objectives and priorities, local resource opportunity and constraints and many more (David, 2011). Hence, the identifying of policies and instruments to create the enabling environment for sustainable tourism is more of national strategy while the determining of what happens on ground is more of local strategies (Governemnt, 2009). Both the national and local tourism strategies are required for sustainable tourism to embrace the principles of sustainable development and both strategies are reliable and commonly reinforcing (Othman, 2004). Finally, the command control instrument allows government to exert strict control over certain aspects of development and operation, backed by legislation (Organisation, 2005). Legislation, regulation and licensing are the interdependent tools that can be used to strengthen sustainability by setting out requirements that are compulsory and enforceable and which lead to sanctions and penalties if they not met (Billington, Carter, & Kayamba, 2008). The process of checking and signaling compliance with regulations or otherwise identified obligatory standards; assigning permission to operate is called licensing (Organisation, 2005). To control aspects of business development and operations and to influence peopleââ¬â¢s behavior government are in a position to apply laws, regulations and penalties. These legislation and regulations must be applied when the governments believes that it is necessary to do so (Governemnt, 2009). Thus, for regulations to be successful, it has to be relevant, clear, practicable in terms of compliance and capable of being enforced. In order the tourism industry to be more sustainable the laws and legislations should enable and support the sustainability of tourism and give authority to act (Billington, Carter, & Kayamba, 2008). It should also seek to raise sustainability performance above such standards through other means, which would also stimulate personal commitment towards continual improvement. For example, in the government of Fiji builds up a (EIA) environmental Impact Assessment regulation, which stated that for any company or hotel with an EIA reports in Fiji, has to provide the Fiji Government with an EIA report of the development to progress (Turnbull, 2003). There are a number of areas in which laws and regulations can be implemented to attain more sustainable tourism industry and that includes operation, management and development which are controlled by this legislation to protect the environment, communities, culture and heritage, visitor experience and the business as a whole (Turnbull, 2003). The purpose of government intervention in the sector as law provides a vehicle for underpinning sustainability. These legislations can also provide the basis for enabling the control and licensing of activities specific to the tourism sector and for the undertaking to certain action to support tourism development (Organisation v. s. , 2013). To conclude, sustainable tourism is all about forecasting of long-term, working together examining on results and adaptive to change and the most effective thing is communication to put across the message of sustainable tourism. It is the duty of the private, public and independent sector to acquire leadership role in tackle the challenge of this sector. The degree at which the tourism industry is increasing in the South Pacific forecasts that the environmental and social impacts of tourism cannot be disregarded. Traditionally, a number of sustainable tourism activities has been carried out and is supported by the national Tourism Organization of the South Pacific countries. However, there are a number of challenges that still stay alive and need attention in order to be more sustainable tourism industry, like climate change. In order to tackle these challenges and grip future sustainable opportunities in a harmonized manner, research and development done in these South Pacific countries to handle these issues through sustainable tourism strategy plan. The tourism strategies plans would assist the tourism industry to change unenthusiastic community discernment of the industry and achieve economic benefits through sustainable practices. It believed that it would egg on business to hold sustainable tourism practices in order to meet consumers demand and to improve business performance. Sustainable tourism should be broadcasted and celebrated amongst tourists, host communities and the participants in the industry move the industry toward sustainability. Nevertheless, the commitment to change and improve must be authentic and supported on well-established procedures and actions that is to be achieved. Assignment Essay. (2016, Sep 09).
Friday, September 27, 2019
Assessing Patients Feedback On Receiving Herbal Medicine Treatment Dissertation
Assessing Patients Feedback On Receiving Herbal Medicine Treatment - Dissertation Example The basis of the finding is lined up in the literature review part, where the author has exhaustively cited examples that are arguably centralized on the herbal treatment. Understanding the importance of medical treatment, most of the literature cited here has submerged in the argument on whether clinicians should adhere in most of the clinics in the country to this right treatment. This report is a critical representation of a research done by the university polyclinics with the help of the social research institutes, on patientsââ¬â¢ views on the effectiveness of the herbal Medicare. Recently complementary and Alternative medicine has been seeking to gain greater acceptance into the community and thus there is the greater emphasis for it to be taken first as a professional course. Thus the University of Westminster has the mandate to ensure all its students reach an acceptable standard that can be in a position to meet patientsââ¬â¢ needs before awarding them a degree. First, the research has touched on the patient-centered care, where special issues and barriers have been put into the analysis (Barnes, 2009, pg34). After the target groups, which are the practitioners and some of the Herbal medicine students, have been identified, the next thing is to illustrate questionnaires and outline the data found by analysis them in a more strategized manner. After the above have been met, methodology and data analysis designs have been included, for the implementation purposes (Sinclair, 2010, pg42). It is better to understand that without a detailed analysis of the data, the target group might not give out clear variations and impact of herbal being included clinical treatment.
Subscribe to:
Posts (Atom)